Advertisement
Plug the micro USB cord into the back of the display, taking special care in the orientation of the
cord. There is a "B" printed on one side of the cord plug, which must be facing the bottom of
the monitor. Improper orientation of this cord will result in a damaged cord and/ or socket and
will NOT be covered under warranty.
The other side of the Micro USB gets plugged into the Controller. Once again, the orientation
of the cord is such that the printed "B" is facing the mounting tab, or the bottom of the
controller. There are three ports in the end of the controller. The display port, shown below,
the middle port (Mini USB Type B), Which can be connected to a computer for a direct
relationship with our Warp custom tuning software, and the white socket, which connects to
the optional EGT kit.
Advertisement
