Table of Contents
Advertisement
Digital Tuner
Digital tuner
Tuning to radio stations
1 Push the source selector to TUNER.
➜ t t u u is displayed briefly, then the radio sta-
tion frequency, waveband and, if pro-
grammed, a preset number are shown.
(See 2)
2 Push BAND to FM or AM to select
desired waveband.
3 Press and hold TUNING ∞ or § until the
frequency in the display starts running.
➜ The radio automatically tunes to a station
of sufficient reception. Display shows
S S r r c c h h during automatic tuning.
4 Repeat step 3 if necessary until you find the
desired station.
•
To tune to a weak station, press TUNING
∞ or § briefly and repeatedly until you have
found optimal reception.
To improve radio reception:
For FM, extend, incline and turn the tele-
•
scopic antenna. Reduce its length if the signal
is too strong.
For AM, the set uses a built-in aerial. Direct
•
this aerial by turning the whole set.
Programming radio stations
You can store up to a total of 20 radio sta-
tions in the memory (10 FM and 10 AM),
manually or automatically (Auto store).
Manual programming
1 Tune to your desired station (see Tuning to
radio stations).
2 Press PROG to activate programming.
➜ Display: PROG flashes.
3 Press ALB/PRE +/- once or more to allo-
cate a number from 1 to 10.
4 Press PROG to confirm.
5 Repeat steps 1-4 to store other stations.
Helpful hints:
–
You can erase a preset station by storing
another frequency in its place.
Autostore
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1 Push BAND to FM or AM to select
desired waveband.
2 Press PROG until A A u u t t O O displays and flashes.
➜ Available stations are programmed (AM
or FM). After all stations are stored, the
first autostore preset station will then
automatically play.
To listen to a preset or autostore sta-
tion
Press the ALB/PRE +/- buttons once or
more until the desired preset station is dis-
played.
CD/MP3 Player
About MP3
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while main-
taining CD quality sound.
•
Getting MP3 files: you can either down-
load legal music files from the internet to
your computer hard disc, or create such files
by converting audio CD files in your comput-
er through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
•
Creating a MP3 CD: burn the music files
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
Make sure that the file names of the MP3 files
–
end with .mp3.
–
Total number of music files and albums: around
350 (with a typical file name length of 20 char-
acters)
The length of file names affects the number of
–
tracks for playback. With shorter file names,
more files can be burned on a disc.
Playing a disc
•
This CD player plays Audio Discs including
CD-R/CD-RW and MP3-CD. Do not try to
play a CD-ROM, CD-I, CDV,VCD, DVD or
computer CD.
IMPORTANT!
CDs encoded with copyright protection
•
technologies by some record companies may
be unplayable by this product.
1 Adjust the Source selector to CD/MP3.
2 Open the CD door, and insert a CD/MP3
with the printed side facing up, then press
the CD door gently to close.
➜ Display shows flashing r r E E A A d d , indicating
the disc reading, then the total track num-
ber and playing time. "CD" is also display
(See 3).
➜ For MP3: "MP3" and the total album
number are also displayed (See 4).
3 Press 2; to start playback.
➜ Display shows current track number and
the elapsed time of the track.
4 To pause playback, press 2;.
➜ Display:The elapsed playing time flashes.
5 To resume, press 2; again.
6 To stop CD playback, press 9.
Helpful hints:
CD play will also stop when:
you open the CD door;
–
–
you select TUNER or OFF;
–
the CD has reached the end.
Selecting a different track
• Press TUNING ∞/ § once or repeatedly
until the desired track number appears in the
display.
For MP3: First press ALB/PRE +/- once or
more to find your album.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold TUNING
∞/ §.
➜ The CD/MP3 is played at high speed and
with reduced volume.
Advertisement
Table of Contents
