Table of Contents
Advertisement
Using the Wake-on-LAN
If you want to wake up your computer using the smart device, ensure that you enable the
computer's Wake-on-LAN settings.
To configure your computer's Wake-on-LAN settings:
1.
From BIOS Setup, go to Advanced > APM Configuration then set Power On By
PCI-E/PCI to [Enabled].
2.
From Windows
a.
On your desktop, click Start, right-click Computer > Manage to launch the
Computer Management screen.
b.
Click Device Manager to view all the installed devices.
c.
Click Network Adapters, right-click the installed module card (Broadcom or
Atheros) then click Properties > Power Management tab.
d.
Tick these items Allow this device to wake up the computer and Only allow a
magic packet to wake the computer.
For 802.11ac standard Wi-Fi GO! Card, the Wake-on-LAN function will be supported in the
later version for Windows
OS, do the following:
®
8 operating system.
®
21
Hide quick links:
Advertisement
Table of Contents
