Table of Contents
Advertisement
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
No power.
"
" is displayed.
No picture on TV screen.
No colour on TV
Distorted or poor picture.
The aspect ratio of the screen
cannot be changed even though
you have set the TV shape.
The DVD player does not
start playback.
Troubleshooting
Solution
– Check if the AC power cord is properly
connected.
– Insert a disc.
– Check if the disc is inserted upside down.
– Wait until the moisture condensed at the lens
has cleared.
– Replace or clean the disc, see "Maintenance".
– Use a readable disc or correctly recorded format
MP3-CD.
– Select the appropriate video input mode on the
TV set.
– Check if the TV set is switched on.
– Check the video connection.
– Check if the system is securely connected.
– TV has a colour system standard. If the disc's or
DVD system's colour system is different than
your TV's colour system, the picture may be
distorted or colourless.
– Change the system t the respective PAL or
NTSC setting.
– Sometimes a slight picture distortion may appear.
This is not a malfunction.
– Clean the disc.
– The aspect ratio is fixed on the DVD disc.
– The aspect ratio may not be changed for some
TV systems.
– Check the source switch on the disc mode.
– Insert a readable disc.
– Check the disc type, color system and region
code.
– Clean the disc.
– Place the disc with the playback side down.
– Press SYSTEM MENU to turn off the setup
menu.
– Cancel the parental control rating function or
change the rating level.
– Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
27
Advertisement
Table of Contents
