Connecting An Auxiliary Audio Device; Appliance Settings - Craftsman CMST17510 Instruction Manual

Connecting to Bluetooth
Press the Home button
1.
2. Press the Bluetooth
Enable Bluetooth
3. ®
4. Scan for the VERSASTACK™ RADIO + CHARGER, display name: VERSASTACK_XXXX
(where XXXX is an identifier of the device) and select it.
Once paired and connected, the connected device name is displayed on the screen.
Disconnecting the Connected Device
From the Bluetooth screen press the Bluetooth
®
LED changes from yellow to gray.
Changing the Connected Device
1. From the Bluetooth
devices appears.
2. Press the touch button next to the required user name. The device will be discovered and
connected (if Bluetooth
Playing Audio through Bluetooth
Any audio (as music) stored on a mobile device that is connected via Bluetooth
RADIO + CHARGER can be streamed from the connected device to the VERSASTACK™ RADIO +
CHARGER.
After connecting a mobile device via Bluetooth
Press the Selection Dial to play the last played song.
•
The song name is displayed on the screen.
Press the Left or Right buttons
•

CONNECTING AN AUXILIARY AUDIO DEVICE

Connect a 3.5 mm audio cable (not provided) between the 3.5mm Auxiliary input jack and the
1.
output jack of your audio device.
Press AUX as the audio source. The screen displays an AUX figure.
2.
3. Operate the audio through the connected device.

APPLIANCE SETTINGS

1. Press the Home button
2. Press the Settings touch button
Settings to the following can be performed: System, Sound, Display, Bluetooth
®
and select BT as the audio source.
touch button to disconnect any other connected device.
®
discovery on the audio device you wish to connect.
®
screen, press the settings
®
is enabled on the audio device).
®
®
to move up/down your songs (audio) list.
touch button. The Bluetooth
touch button. A list of all recognized mobile
®
do one of the following:
®
to the VERSASTACK™
®
, FM.
®
23
EN EN