3.7 Other Jumpers: MCLKE (JP14), RDY (JP17), VCC3C (JP24), WEX (JP45),
MONCLK (JP55), RDY or WEX (JP60), AVCC5 (JP82), AVSS (JP83/84),
AVRH5 (JP85)
Jumper
ON (closed)
JP14 (MCLKE)
OFF (open)
ON (closed)
JP17 (RDY)
OFF (open)
ON (closed)
JP24 (VCC3C)
OFF (open)
JP45 (WEX)
ON (closed)
JP55
(MONCLK)
OFF (open)
JP60 (RDX or
WEX)
ON (closed)
JP82 (AVCC5)
OFF (open)
ON (closed)
JP83, JP84
(AVSS)
OFF (open)
ON (closed)
JP85 (AVRH5)
OFF (open)
© Fujitsu Microelectronics Europe GmbH
PB-91469G-LS-256BGA V12
Chapter 3 Jumpers
Setting
Description
MCLKE P10_6:
Output pin for external bus memory clock enable.
RDY P08_7: Input pin for external wait.
Pull up 3V3
VCC3C > 10µF | 10nF > GND
1-2
WEX P10_3 use for DIR
2-3
V460_WEX use for DIR
MONCLK: Clock Monitor Output
1-2
RDX is for SRAM and Flash
2-3
WEX is for SRAM and SDRAM
Analog supply voltage is connected to the target
Analog supply voltage is disconnected from the
target
Analog input voltage is connected to the target
Analog input voltage is disconnected from the
target
Analog reference voltage is connected to the target
Analog reference voltage is disconnected from the
target
- 19 -
UG-910022-13