Connecting.the.cables - Asus BE24D Series User Manual

2.6 Connecting the cables
Connect the cables as the following instructions:
•. To.connect.the.power.cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•. To.connect.the.VGA/DVI/DisplayPort/HDMI.cable:
a. Plug one end of the VGA/DVI/DisplayPort/HDMI cable to the monitor's
VGA/DVI/DisplayPort/HDMI jack.
b. Connect the other end of the VGA/DVI/DisplayPort/HDMI cable to your
computer's VGA/DVI/DisplayPort/HDMI jack.
c. Tighten the two screws to secure the VGA/DVI connector.
•. To.connect.the.audio.cable:.connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
•. To.use.the.earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI or DisplayPort signal is fed.
•. To.use.the.USB.3.0.ports: Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor's USB
upstream port, and the larger end (type A) to your computer's USB 3.0 port.
Make sure your computer is installed with the lastest Windows 7/Windows 8.1/
Windows 10 operating system. That will enable the USB ports on the monitor
to work.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
ASUS BE Series LCD Monitor 2-5