Using Usb Connectivity; Usb Connection - Philips AZ1834/12 User Manual

Using USB connectivity

USB Connection

• AZ1834 is fitted with a USB port in the front
panel, offering a plug and play feature which
allows you to play, from your AZ1834, digital
music and spoken contents stored on a USB
mass storage device.
• Using a USB mass storage device, you can
also enjoy all the features offered by AZ1834
which are explained and instructed in the sec-
tions of disc operation.
Compatible USB mass storage devices
With the AZ1834, you can use
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
• USB device which requires driver
installation under Windows XP is not
supported.
Note:
In some USB flash players (or memory
devices), the stored contents are recorded
using copyright protection technology. Such
protected contents will be unplayable on any
other devices (such as AZ1834 device).
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 - 4096 bytes)
– MP3 bit rate (data rate): 32-320 kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums: maximum 500
– Number of tracks: maximum 999
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum
length: 30 bytes
The system will not play or support
the following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
• Non-supported file formats are skipped.
This means that e.g.: Word documents .doc or
MP3 files with extension. dlf are ignored and
will not be played.
• AAC, WAV, PCM. NTFS audio files
• DRM protected WMA files
• WMA files in Lossless format
Playing a USB mass storage device
1 Make sure that your AZ1834 is being
powered by AC mains or specified batteries.
2 Adjust the source selector to
CD/USB/AUX.
Disconnect the line-in cable if it is connected
•
to an external device and AUX IN jack on
the set.
➜ Display shows - - - with "DISC"(see 2), or
- - - with "USB" (see 3)
3 Press USB to enter USB mode if USB is
NOT displayed.
➜ Display will show "USB" (see 3).
4 As shown in figure 9 , plug a compatible
USB mass storage device to AZ1834's USB
port marked
USB cable to connect between the device
and AZ1834's USB port.
➜ The device will automatically power on.
• If the device is not powered on, turn on the
power manually, then re-connnect it.
➜ AZ1834's display shows USB and the total
number of playable audio files (Max.
displayed track number is 999) stored on
the device.
5 Press 2; on your AZ1834 to start play.
➜ AZ1834's display will show USB and share
the display information illustrated in the
disc operation.
. If needed, use a suitable