Usb Connection; Using Usb Connectivity - Philips AZ1832B User Manual

USB Connection

Using USB connectivity

• AZ1832B is fitted with a USB port in the
front panel, offering a plug and play feature
which allows you to play, from your
AZ1832B, digital music and spoken contents
stored on a USB mass storage device.
• Using a USB mass storage device, you can
also enjoy all the features offered by
AZ1832B which are explained and instructed
in the sections of disc operation.
Compatible USB mass storage devices
With the AZ1832B, you can use
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
• USB device which requires driver
installation under Windows XP is not
supported.
Note:
In some USB flash players (or memory
devices), the stored contents are recorded
using copyright protection technology. Such
protected contents will be unplayable on any
other devices (such as AZ1832B device).
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 - 4096 bytes)
– MP3 bit rate (data rate): 32-320 kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums: maximum 500
– Number of tracks: maximum 999
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum
length: 30 bytes
The system will not play or support
the following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
• Non-supported file formats are skipped.
This means that e.g.: Word documents .doc
or MP3 files with extension. dlf are ignored
and will not be played.
• AAC, WAV, PCM. NTFS audio files
• DRM protected WMA files
• WMA files in Lossless format
Playing a USB mass storage device
1 Make sure that your AZ1832B is being
powered by AC mains or specified batteries.
2 Adjust the source selector to
CD/USB/AUX.
➜ Display shows - - - with "DISC"(see 2),
or - - - with "USB" (see 3)
3 Press USB to enter USB mode if USB is
NOT displayed.
➜ Display will show "USB" (see 3).
4 As shown in figure 9 , plug a compatible
USB mass storage device to AZ1832B's USB
port marked . If needed, use a suitable
USB cable to connect between the device
and AZ1832B's USB port.
➜ The device will automatically power on.
• If the device is not powered on, turn on the
power manually, then re-connnect it.
➜ AZ1832B's display shows USB and the
total number of playable audio files (Max.
displayed track number is 999) stored
on the device.
5 Press 2; on your AZ1832B to start play.
➜ AZ1832B's display will show USB and
share the display information illustrated in
the disc operation.
Helpful hints:
– Make sure that file names of MP3 files end
with .mp3. and the file names of WMA files end
with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion. Visit
www.microsoft.com for details about Windows
Media Player and WM DRM (Windows Media
Digital Rights Management).
– For USB device playing, if the display shows
"OL", it means that the USB device is electrically
overloading AZ1832B.You need to change a
USB device.