Marklin Digital 60985 Manual page 46

CV
Explanation
Storing different states:
Bit 0: Storing function states
173 PoM Bit 1: Storing speed
Bit 2: After a reset starting up with/without ABV
Bit 3 - 7: always 0
Storing different states:
PoM
174 Bit 0: Storing direction of travel
Bit 1 - 7: always 0
176 PoM Vmin Analog DC
177 PoM Vmax Analog DC
178 PoM Vmin Analog AC
179 PoM Vmax Analog AC
CV 31 must first be set to the value 16 and CV 32 to the value 0 (see CV 31) to change the volumes (CV 300 - CV 328).
300 PoM Sound output: Volume of running sounds*
301 PoM Sound output: Volume for Sound 1*
- up to
Sound output: Volume for Sound 16*
328 PoM
PoM must be supported by the locomotive
controller / central controller.
46
CV Table for DCC
Values
Default
0 / 1
0 / 2
0 / 4
0 / 1
0 - 255 50
0 - 255 170
0 - 255 60
0 - 255 190
0 - 255 180
0 - 255 180
0 - 255 180
* An extensive table for function mapping can be found on the Internet at:
http://www.maerklin.de/de/service/technische-informationen
Notes
0 = do not store, value = store
7
Individual values must be added.
0 = do not store
1
1 = store
Must be smaller than CV 177
Must be larger than CV 176
Must be smaller than CV 179
Must be larger than CV 178
0 = no sound