Page 3
4Post Installation Instructions Step 3a. Round/Threaded Hole Racks: Attach the Front and Rear of the rails to the 4Post rack as shown below using supplied 8-32 Pan Head Screws on each side. Repeat for the other side. Right side shown, Left side rail is labeled "L". Tighten the front and rear Pan Head Screws on the right side rail.
Page 4
Note: When tightening the loose rails, support the bottom of the server to ensure proper rail adjustment. 2Post Center Installation Instructions Step 1. Rail Attachment: Attach the Inner Rail to the chassis by aligning the Shoulder Lugs with the keyholes in the Inner Rail, then slide toward the front of the server.
Page 5
2Post Center Installation Instructions Step 3. Attach the rails to the rack: Attach the Front and Rear of the rails to the 2Post rack as shown below using supplied 12-24 Pan Head Screws on each side. Repeat for the other side. Right side shown, Left side rail is labeled "L". Tighten the front and rear Pan Head Screws on the right side rail.
Page 8
Warranty Statement Innovation First, Inc. warrants our products against defects in material and workmanship for a period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to repairing or replacing, at our option, any defective product. 2546...