Warranty And Support; Troubleshooting - Philips 1000 Series Manual

18
English

Warranty and support

Troubleshooting

Problem
The appliance
does not shave as
well as it used to.
The appliance
does not work
when I press the
on/off button.
2 Remove the outer panels of the shaver with a
screwdriver or other tool. If necessary, also
remove additional screws and/or parts until you
see the printed circuit board with the
rechargeable battery.
3 Remove the rechargeable battery.
If you need information or support, please visit
www.philips.com/support or read the
international warranty leaflet.
This chapter summarizes the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
The shaving heads
are damaged or
worn.
Long hairs obstruct
the shaving heads.
You have not
inserted the
shaving heads
properly.
The appliance is
connected to the
wall socket.
Solution
Replace the shaving heads
(see ' ').
Clean the shaving heads
one by one.
Make sure the notches on
both sides of the shaving
heads fit exactly onto the
projections in the shaving-
head holder.
This appliance can only be
used without cord.