Advertisement
MOUNTING HARDWARE
MOUNTING HARDWARE
MOUNTING HARDWARE
SENSOR
SENSOR
SENSOR
CABLE
CABLE
CABLE
BELOW DECK
BELOW DECK
BELOW DECK
CONTROL BOX
CONTROL BOX
CONTROL BOX
CONTROL
CONTROL
CONTROL
BOX CABLE
BOX CABLE
BOX CABLE
SUPPLY
SUPPLY
SUPPLY
HOSES
HOSES
HOSES
(A) KE19-1000 Series
(A) KE19-1000 Series
(A) KE19-1000 Series
KE19 / KE21 SERIES INSTALLATION
1. AVOID CONTACT WITH WATER DURING ASSEMBLY TO MINIMIZE CHANCE OF WATER DAMAGE.
2. INSTALL SPOUT ONTO FAUCET BODY (A AND B).
3. PREPARE SINK FOR ANTI-ROTATION PIN (OPTIONAL).
• MARK HOLE LOCATION AS USING SUPPLIED TEMPLATE AND DRILL APPROPRIATELY SIZED HOLE
• INSTALL ANTI-ROTATION PIN ONTO FAUCET BODY
4. PASS SENSOR CABLE THROUGH MOUNTING HOLE AND MOUNT FAUCET ONTO SINK WITH PROVIDED MOUNTING
HARDWARE.
5. FOR WALL MOUNT FAUCET DESIGNS (A), CONNECT 90 DEGREE ELBOW AT THE FAUCET SHANK.
6. CONNECT CONNECTOR HOSE TO THE ELBOW (A) OR DIRECTLY TO FAUCET SHANK (B AND C).
7. MOUNT BELOW DECK CONTROL BOX AT APPROPRIATE DISTANCE BELOW SINK (SO SENSOR CABLE CAN CONNECT)
USING MINIMUM TWO MOUNTING SCREWS (NOT PROVIDED) IN OPPOSITE CORNERS.
8. CONNECT OTHER END OF CONNECTOR HOSE TO THE SOLENOID.
9. CONNECT SUPPLY HOSES TO THE MIXING VALVE.
10. REMOVE BLACK CAP FROM CONTROL BOX CABLE AND CONNECT CABLE TO THE SENSOR.
11. CONNECT POWER SUPPLY (IF PROVIDED) TO THE WALL OUTLET.
12. FAUCET WILL START WITHIN A COUPLE OF SECONDS.
INSTALLATION INSTRUCTIONS
ELBOW
ELBOW
ELBOW
800-526-3694 • www.encoreplumbing.com
SPOUT
SPOUT
SPOUT
FAUCET
FAUCET
BODY
BODY
CONNECTOR
CONNECTOR
CONNECTOR
HOSE
HOSE
HOSE
SOLENOID
SOLENOID
SOLENOID
MIXER
MIXER
MIXER
VALVE
VALVE
VALVE
(B) KE19-4000 Series
(B) KE19-4000 Series
(B) KE19-4000 Series
DRAIN
DRAIN
DRAIN
FAUCET
BODY
(C) KE21-7000 Series
(C) KE21-7000 Series
(C) KE21-7000 Series
WALL
WALL
WALL
BRACKET
BRACKET
BRACKET
Advertisement
