6.0 Warning and points of attention ................5 7.0 Warranty conditions ....................7 1.0 Introduction Congratulations with the purchase of this high-quality ACT product! This product has undergone extensive testing by ACT’s technical experts. Should you experience any problems with this product, you are covered by ACT warranty.
ENGLISH 3.0 Installation instructions Because of the built-in EDID protocol, you need to make sure that all connected devices are powered before the HDMI extender is switched on. 1. Connect the HDMI input source ( such as Media player, BD/DVD player etc.) to the transmitter unit using a HDMI cable.
A power socket is needed which should be close and easy accessible from the device. Repairing of the device should be done by qualified ACT staff. Never try to repair the device yourself. The warranty immediately voids when products have undergone self- repair and/or by misuse.
Page 6
If you are experiencing any problems with the printed manual or you cannot find what you are looking for, please always check our website www.act- connectivity.com first for the newest updated manual.
ACT warranty. Products are not covered by the ACT warranty when exposed to incorrect/improper use, external influences or when opening the service parts of the product by parties other than ACT. ACT may use refurbished materials for repair or replacement of your defective product. ACT cannot be held responsible for changes in network settings by internet providers.