Connect Power; Turn On; Find The Correct Viewing Channel; Select Tv System That Match The Connected Tv - Philips AZ5741/55 User Manual

Connect power

Caution
‡
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the bottom of the unit.
‡
The type plate is located on the bottom of the main
unit.
‡
Before connecting the AC power cord, make sure you
have completed all other connections.
1
Switch the voltage selector at the back of
the unit to the local power line voltage.
2
Connect the AC power cable to:
‡ the main unit.
‡ the wall socket.

Turn on

Slide the source selector on the main unit to
DISC/USB/FM.
Turn off
Slide the source selector on the main unit to
OFF.
Find the correct viewing
channel
1
Slide the source selector to DISC.
2
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
‡ Go to the lowest channel on your TV,
then press the Channel Down button
until you see the blue screen.
‡ Press the source button repeatedly on
the remote control of your TV.
Tip
‡
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Select TV system that match
the connected TV
This DVD player is compatible with both NTSC
and PAL. For the playback of a DVD disc on this
DVD soundmachine, the color systems of the
TV set and DVD player should match.
1
Press SYSTEM MENU.
2
Select [SYSTEM SETUP] >[TV SYSTEM],
and then press .
3
Press / to select one of the options
below and then press OK.
[NTSC] For TV with NTSC color system.
[PAL] For TV with PAL color system.
[AUTO] For TV with multiple color
systems.
4
Press SYSTEM MENU to exit.
EN 9