Download Print this page
Graco Smart Seat Replacement Manual
Graco Smart Seat Replacement Manual

Graco Smart Seat Replacement Manual

Buckle replacement guide
Hide thumbs Also See for Smart Seat:

Advertisement

Quick Links

To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
You will receive ONE of
these Graco approved
replacement buckles.
Follow instructions for
proper installation.
3
MAKE SURE headrest is
not in highest position.
Lay the seat on a table or
up.
6
Remove the harness strap
loops from splitter plate.
9
Remove the chest clip. DO
NOT DISCARD the chest
clip.
Smart Seat® Buckle Replacement Guide
1
Remove seat from base.
4
Do not remove the
elastic straps at the
top. Remove the back
cover by removing the 2
screws.
7
Pull harness straps out
from behind the bar
10
2
Loosen straps by lifting
lever and pull harness
straps out.
5
Lift back cover up and
then rotate back as
shown.
8
Turn seat upright. Pull
harness straps out from
the seat.
Unbuckle harness by
tilting top of buckle
down, press top of red
button, and pull
tongues out of buckle.
©2014 Graco PD272023C 5/14

Advertisement

loading

Summary of Contents for Graco Smart Seat

  • Page 1 Smart Seat® Buckle Replacement Guide ©2014 Graco PD272023C 5/14 To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle You will receive ONE of Loosen straps by lifting these Graco approved lever and pull harness replacement buckles. Remove seat from base.
  • Page 2 With tongues attached, slide the NEW Re–attach chest clip and slide the clip down buckle onto harness straps. Make Remove and discard to the buckle. MAKE sure the red button is facing out and tongues. sure not to twist straps. the harness straps are not twisted.
  • Page 3: Final Check

    In USA: FINAL CHECK : • Tug on the buckle to be sure Graco Children’s Products it is properly secured in the 3 Glenlake Parkway bottom of the seat and does Atlanta, GA 30328 not come out.
  • Page 4 Smart Seat ® Guide de remplacement de la boucle Comment retirer la boucle et les languettes existantes et installer la boucle de rechange Vous allez recevoir UNE de ces boucles de rechange Graco approuvées. Suivre les directives pour une installation adéquate.
  • Page 5 Smart Seat ® Guía de reemplazo de la hebilla Para sacar las lengüetas existentes y la hebilla del arnés e instalar una hebilla de repuesto Usted recibirá UNA de estas hebillas de reemplazo aprobadas por Graco. Siga las instrucciones para una instalación adecuada.