Erasing The Program - Philips AZ1050/00 User Manual

CD MODE: Programming track numbers
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1 When CD play is stopped, select the desired track with ∞ or
§.
2 As soon as the number of the desired track is displayed, press
CD MODE to store the track in the memory.
™ appears on the display. P lights up briefly, then the
PROGRAM
number of the stored track is shown.
3 Select and store all desired tracks in this way.
4 You can review your settings by pressing and holding CD MODE
for more than 1 second.
™ The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks, the display shows F.
Playing the program
Press 2; to play the program.

Erasing the program

From the stop position, press 9.
™ no lights up briefly,
is erased.
Note: The program will also be erased if you:
– interrupt the power supply,
– open the CD compartment, or
– move the POWER slider.
disappears and your program
PROGRAM
CD PLAYER
PROGRAM
PROGRAM
PROGRAM
PROGRAM
9