Example with XMC4700 Relax Kit for 5V
Shields
Notes
The Shield2Go Adapter is directly compatible with the
•
XMC4700 Relax Kit for 5V Shields (compatible with
Arduino Uno form factor)
Stack the Shield2Go Adapter on top of the XMC4700
•
Relax Kit for 5V Shields with a Shield2Go board of
your choice, e.g. DPS310 Pressure Shield2Go as
shown right
Using the
XMC-for-Arduino
•
Arduino examples
Arduino can be directly used
Steps
Open one of the examples for the Shield2Go Adapter with File – Open... and
•
select as board XMC4700 Relax Kit - more information can be found
Connect the stacked boards to the PC and press the Upload button
•
Select the related COM port from Tools – Port and open the serial monitor with
•
the set baud rate (see sketch/code with Serial.begin(<BAUDRATE>);)
2018-08-03
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Arduino integration, the
for the Shield2Go Adapter for
https://github.com/Infineon/XMC-for-Arduino
https://github.com/Infineon/Shield2Go-Adapter-for-Arduino
Copyright © Infineon Technologies AG 2018. All rights reserved.
here
7