Advertisement
Introduction
The Shield2Go Adapter for Arduino is a PCB adapter to connect Infineon's
Shield2Go series with the 3
available shields for Arduino Uno form factor.
Infineon's Shield2Go form factor is a comprehensive shield design derived from
the XMC 2Go evaluation board. All boards share a common pin out design, i.e.
pins are hard coded to specific functions like SPI or I2C. This enables a generic
PCB evaluation board design for Infineon's portfolio like the DPS310 Pressure
Shield2Go, the TLV493D-A1B6 3DMagnetic Shield2Go, the TLI4970-D050T4
CurrentSense Shield2Go or the OPTIGA™ Trust E Security Shield2Go.
Moreover, easy to use software is available for this
adapter to speed up development of the Shield2Go
boards and systems compatible with the Arduino
ecosystem. All software is released into the public
domain and available as open source libraries on
GitHub.
2018-08-03
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
party Arduino ecosystem like Arduino Uno or the
rd
Copyright © Infineon Technologies AG 2018. All rights reserved.
2
Advertisement
