Evaluation Board Notes
Information
Supply voltage is typ. 5.0 V as common voltage for
•
the shields compatible with Arduino Uno
Level shifting is available to convert the logic level
•
of 5.0 V to 3.3 V of all current Shield2Go boards
Solder bridges are available to deactivate the level
•
shifting selectively
Additional pins enable the settings of the reference
•
voltages for level shifting as well as the analog
reference voltage
The Shield2Go adapter for Arduino supports the
•
separate power control of the Socket 1 and Socket
2: both sockets can be switched off and on
Socket 1 is completely independently controllable
•
while Socket 2 and 3 share pins to the underlying
control board
OPN MYIOTADAPTERTOBO1
•
Ensure that appropriate level shifting is set up
2018-08-03
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Copyright © Infineon Technologies AG 2018. All rights reserved.
3