Store Flight Plan; Invert Flight Plan - Garmin GTN 625 Pilot's Manual Upgrade Supplement

4.3.1
Foreword
A flight plan must be saved to the Catalog to be used in future flights. The
Getting
Store Flight Plan function will save the Active Flight Plan to the Catalog.
Started
NOTE: If a flight plan that includes a procedure that has been modified
Audio &
by the pilot is saved into the flight plan catalog, the GTN cannot check the
Xpdr Ctrl
accuracy of that procedure when that flight plan is used on a later flight. It
Com/Nav
is recommended that flight plans with modified procedures not be saved
in the flight plan catalog.
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Original Flight Plan
Weather
Duplicate Flight Plan
Nearest
Services/
Music
Utilities
4.3.2
System
NOTE: Inverting a flight plan removes all ATKs.
Messages
This option allows you to reverse the active flight plan and use it for navigation
guidance back to your original departure point. The original flight plan stored in
Symbols
the catalog is not affected.
Appendix
Index
4-24

Store Flight Plan

1. While viewing the Active Flight Plan page, touch the Menu
key. The Flight Plan menu opens.
2. Touch the Store key to store the current Active Flight Plan into
the Catalog. The flight plan will be named by the beginning
and ending waypoints.
3. When a duplicate flight plan is created, the Store key will not
be available and the flight plan will be saved with a numeral
at the end of the destination waypoint.
Figure 4-45 Duplicate Flight Plan Naming

Invert Flight Plan

1. While viewing the Active Flight Plan page, touch the Menu
key. The Flight Plan menu opens.
2. Touch Invert.
GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. N