Garmin GTN 625 Pilot's Manual Upgrade Supplement page 37

7.9 Import User Waypoints (Datacard)
NOTE: This feature is available in software v5.10 and later.
The GTN can import user generated waypoints from a file on the datacard.
The created waypoints will be at the latitude and longitude specified in the file
with the specified name and comment. This function overwrites any existing
user waypoints with the same name.
When a user waypoint file is on the datacard, a key will be available on the
Waypoint Info page for importing user waypoints.
1. Insert a datacard with the User waypoints into the GTN.
2. From the Waypoint Info page, touch the Import Waypoints
key.
3. Touch OK to acknowledge the pop-up to import all of the user
waypoints in the file.
4. The pilot is informed of the status of the user waypoint import
via one of the following system messages.
190-01004-03 Rev. N
Figure 7-31 Start User Waypoint Import
GTN 625/635/650 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
7-23