Sealey SPI15S.V2 Owner's Manual page 7

10. FEATURES
11. CONTROl PANEl
DIgITAl DISPlAY
The digital display indicates the status of the battery and charger. See Display Messages
for a complete list of messages.
lANgUAgE/ChARgER AND POWER SUPPlY BUTTON
lANgUAgE: The digital display will show the battery's voltage and percentage of charge.
Press the button for 5 seconds to select the language on the display.
(EN→ DE→ FR→ NL→ ES).
ChARgER AND POWER SUPPlY: Click the button to select mode (charger or power
supply), then double click the button to enter the mode which you selected. The selected
mode will be saved. If no button is pressed charging will begin automatically in 10 minutes.
lED INDICATOR
gREEN lED solid (ChARgINg): The charger is connected and is charging a battery.
gREEN lED pulsing (ChARgED/MAINTAININg): The battery is fully charged and the
charger is in Maintain Mode.
GREEN LED flashing: The charge has aborted. (See Aborted Charge section.)
NOTE: See Operating Instructions for a complete description of the charger modes.
12. OPERATINg INSTRUCTIONS
WARNING
The charger does not have an ON/OFF switch. The On and Off commands are controlled by
plugging the SPI15S.V2 with Power Supply into an AC electrical wall outlet only after the
battery connections have been made.
IMPORTANT
BATTERY INFORMATION
This charger can charge 6-celled lead-acid batteries with rated capacities of 40-230 Ah.
NOTE: This charger is equipped with an auto-start feature. Current will not be supplied
to the battery clamps until a battery is properly connected. The clamps will not spark if
2
1
3
5
6
This battery charger must be properly assembled in accordance with the
assembly instructions before it is used.
Do not start the vehicle with the charger connected to the AC outlet, or it
may damage the charger and your vehicle.
1. Digital display
2. Hook attachment
4
3. Language and
Charger/Power
Supply button
4. Charging status
LED indicator
5. Battery clamps
6. AC Power cord
• •
7