First Use - Electrolux EC3202AOW1 User Manual

6 www.electrolux.com
3.2 Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature Regulator to
the Full Loaded position and let the
appliance run for 24 hours to allow
the correct temperature to be
reached before placing food inside.
The power indicator light will light up.
3. Adjust the Temperature Regulator
according to the quantity of the
stored foods.
3.3 Switching off
Turn the Temperature regulator to the
OFF position.
3.4 Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as
follows:
• to obtain the minimum coldness, turn
the Temperature Regulator toward
lower settings.

4. FIRST USE

4.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.
A. Temperature Regulator
B. Half Loaded position
C. Full Loaded position
A
B
C
• to obtain the maximum coldness. turn
the Temperature Regulator toward
higher settings.
3.5 High temperature alarm
An increase in the temperature in the
freezer (for example due to an power
failure) is indicated by:
• switching on of the Alarm light
• sounding of buzzer
During the alarm phase, the buzzer can
be switched off by pressing the Alarm
reset switch.
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.
In case of freezing less food
volumes, the Half Loaded
setting is the most suitable.
In case of freezing much
food volumes, the Full
Loaded setting is the most
suitable.
CAUTION!
Do not use detergents or
abrasive powders, as these
will damage the finish.