Parts                                                                           20; Installation - Kayoba 639-447 Operating Instructions Manual

GB SE
PARTS
NOTE! Allen key and fasteners are not illustrated
A Arm with clamp
B Adjustable stand
C Magnetic tool plate
D Locking handle
E Feet with anchor holes
F Adjustable locking rod for the handlebars, holds the front wheel still
G Adjustable rod
Place the product on a level, stable surface and fold out the stand (B) Loosen the locking handle (D),
if necessary, and tighten when the legs are fully extended Fold out the feet (E) so that they rest flat
on the ground
Insert the post (G) in the stand (B) and lock with clamp (A) as illustrated Tighten the locking handles
with your fingers Fit the tool tray (C) at a suitable height using the supplied screws and Allen key
Use of the locking rod for the steering is described on the next page The product's feet have pre-
drilled holes for anchoring to the floor Use suitable fastening hardware for anchoring Only place the
product on a level, stable surface
20
Fig 1

INSTALLATION