Table of Contents
Advertisement
Available languages
Available languages
ATTACHING THE BIKE
IMPORTANT! Failure to follow all the instructions and safety instructions can result in the risk of
serious personal injury
• Place the product on a level, stable surface
• You needed to be 2 to make a height adjustment
• Ensure that at least 75 cm of the arm protrudes from behind the bracket on the post (fig 1, A)
• If the arm is pulled out further the stand can tip over
• Do not pull the post up beyond the marking, the stand can tip over
• Always make sure the bike is stable after fastening
Follow the instructions below to attach the bike
1
Attach the bike in the clamp on the arm before the post is pulled up Place the clamp at the
bike's centre of gravity, irrespective of where on the bike you intend to work (fig 2, 3) Rotate
the arm with clamp (fig 1, A) to the required position Tighten the clamp's locking handle
firmly Hang the bike in the clamp and tighten the clamp with the locking handle Check that
both locking handles are tightened properly
USE
Fig 2
GB
SE
21
Advertisement
Table of Contents
