For Products With A; Water Dispenser; Child Safety; Compliance With Weee Directive And Disposing Of The Waste Product - Beko DSE 30080 User Manual

1

For products with a

water dispenser;

• Pressure for cold water
inlet shall be maximum
90 psi (6.2 bar). If your
water pressure exceeds
80 psi (5.5 bar), use a
pressure limiting valve
in your mains system. If
you do not know how
to check your water
pressure, ask for the
help of a professional
plumber.
• If there is risk of water
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation.
Consult Professional
plumbers is you are not
sure that there is no
• Do not install on the
1
• Use only potable water.

Child safety

• If the door has a lock,
• Children must be
Compliance with WEEE
Directive and Disposing of
the Waste Product:
(WEEE).
9
EN
water hammer effect in
your installation.
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum
and 100°F (38°C)
maximum.
the key should be kept
away from reach of
children.
supervised to prevent
them from tampering
with the product.
This product complies
with EU WEEE Directive
(2012/19/EU). This product
bears a classification
symbol for waste electrical
and electronic equipment