Setting Up The Log Splitter; Kinetic Log Splitter Controls And Features - Masport SK-E5T Owner's Manual

It may be helpful to familiarize yourself with the controls and features of your KINETIC LOG SPLITTER as shown in Figure 1 before beginning these
procedures. If you have any questions at all, please feel free to contact us your local dealer.

KINETIC LOG SPLITTER CONTROLS AND FEATURES

Fig.1
Belt
MODEL
Motor
Max Splitting force
Max splitting length
Max splitting dia.
RPM
Cycle time
New weight
NOTE
* The 5 & 8 ton splitting force relate to these being an equivalent to hydraulic log splitters.
* The diameter listed is indicative of the maximum suggested size. A small log can be difficult to split when it contains knots or a particularly tough fiber.
On the other hand, it may not be difficult to split logs with regular fibers even if its diameter exceeds the maximum indicated above.
* Hard wood requires more force to split even if the diameter is less than the mazimum size.
* Do not force the log splitter if you are experiencing any of the above conditions
* These log splitters are designed to operate on 240 volt AC power, if you wish to use a generator, it must have suitable start up and continuous power
supply. Consult a professional before purchasing or hiring a generator.
6

SETTING UP THE LOG SPLITTER

Ram
Cradle
Frame stand
Flywheel
SK-E5T
1500W,240V~50Hz
5ton
400mm
280mm
400
2seconds
90kgs
Safety Level
Engagement Handle
Belt Guard
SK-E8T
1600W, 240V-50Hz
8ton
520mm
350mm
450
2seconds
110kgs
Splitting Wedge
Handle