Resize; Resize Adjustments - Husqvarna VIKING Designer EPIC User Manual

Resize

Resize can reduce an embroidery design up to five times
smaller than the original design or increase it up to eight
times larger than the original design. The machine
recalculates the number of stitches in the design so the
original stitch density remains. Touch the resize button to
open the resize window.
Note: To reduce or increase the design less than 20%, use the scale
function. The scale function does not change the stitch count.

Resize Adjustments

To change the size of the design, touch one of the resize
handles in the corners of the design selection frame and
move your finger on the screen. The touch function resize
will automatically be selected. When resizing, the height and
width of the design are always adjusted proportionally. The
numbers above the resize button show the current width and
height in millimeters.
When resizing a design the 100% button will be enabled.
Touch the button to return to the original size.
Touch & hold the resize button to lock it and prevent
activation of another touch function by mistake. A padlock
below the button indicates that the function is locked. Select
any touch function to unlock.
Adjust the placement of the design in the hoop using
position and/or rotate.
Retain Fill Type
All fill areas in an embroidery design are made in a specific
fill type to achieve the best results. When enlarging or
reducing a design, the stitches in the fill area will be affected.
The retain fill type function is selected by default, this will
keep the fill types as they were originally created.
Retain fill type gives the best result in most cases. If your
design becomes distorted, try resizing without retaining the
fill type. Reload the original design, deselect retain fill type
and resize your design again.
1. Resize handles
2. Retain fill type
8 Embroidery
3. Resize
4. Return to original size
129