The Smart Way To Use - Mitsubishi Electric CITY MULTI PEFY-P36NMHU-E-OA Operation Manual

Automatic cooling/heating operation
Press button 1 [ON/OFF].
1
Press button 7 [F1] to display the operation mode "Auto".
2
<Auto (dual set point)>
The operation mode will be as follows, depending on the indoor unit inlet outdoor temperature.
* When the operation mode is set to the Auto (dual set point) mode, only "Auto" will appear on the display, even if the display setting of "Auto Cool/Auto Heat" is
enabled.
The settings for Timer and Weekly timer etc. can be made from the remote controller.
Press button 4 [MENU] to go to the Main menu, and move the cursor to the desired setting with button 7 [F1] or 8 [F2]. Refer to the Instruction Book of the remote
controller for further information.

3. The smart way to use

Even minimal steps to care for your air conditioner can help make its use far
more effective in terms of air-conditioning effect, electricity charges, etc.
Clean the filter thoroughly
If the screen of the air filter becomes clogged, the airflow and air-conditioning
effect can be significantly reduced.
Further, if the condition is left unattended, failure can result. It is particularly
important to clean the filter at the beginning of the cooling and heating
seasons. (When profuse dust and dirt have accumulated, clean the filter
thoroughly.)
Heating
59°F
[15°C]
Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor Page
F1 F2 F3 F4
Fan only Cooling
63°F
[17.2°C]
Main Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
Main display:
Cursor Page
F1 F2 F3
Inlet outdoor temperature
F4
7