Bron COUCKE RACL01 Manual

INSTRUCTIONS (TO BE KEPT) RACLETTE APPLIANCE 230 V - REF RACL01 / 110 V - REF RACL02
PLEASE READ CAREFULLY AND APPLY THE FOLLOWING INSTRUCTIONS
CAUTION
• This appliance is not expected to be used by people (included children) whose physical, sensory or mental
capacities are reduced, or by people devoid of experiences or knowledges, except if they can be granted,
by a person responsible for their security , of a supervision in order to make correct use of this product.
• Children must be kept closely watched to be sure they don't play with the item.
• The appliance must be stable and in a horizontal position: leave at least a 30 cm margin to the wall.
The raclette appliance «L'ALPAGE» is an electric appliance that needs to be used carefully
like any other appliance :
• Never use this appliance near inflammable materials.
• Don't use the appliance on a wet surface or with wet hands.
• Don't heat the appliance without cheese, except for the preheating.
If you must stop eating raclette, you have to unplug the electric cable from the the supply area.
BEFORE USE:
• Before each use, unroll entirely the electric cable.
• Be sure that the voltage is the same than the voltage indicated on the appliance, under the base.
• Plug in first the electric cable on the appliance then after on the supply area.
• If the electric cable is damaged, change it with a new one (ref 5007 to apply to your retailler).
• Avoid any contact between the electric cable and the heating box and the resistances.
• The socket must be equipped with a ground phase.
• If you need an extension cable, be sure that this extension is grounded. The section of the wires must be
egal or superior to 1 mm
• If you use an extension cable, take arrangements to avoid that someone take his feet in the extension.
HOW TO USE:
• The appliance is ready, the preheating last about 10 minutes. At the first use a small release of smell and
smoke can occur, it is quite normal.
• Put the half round cheese on the cheese holder, you may have to scrape a little the rind of the cheese. Pay
attention to place the surface of the cheese parallel to the heating box. Put the cheese in the axis of the
cheese holder.
• Adjust the height of the heating box with the black round button: the surface of the cheese must be placed
at about 1 cm of the resistance. If the distance is bigger you will heat all the cheese and you will have to
wait a long time between each «raclette».
• Let heat the cheese about 30 seconds, depending on your taste if you want to gril or not the surface of the
cheese.
• Then move forward the cheese: the cheese holder slope using the round black ball.
• Scrape the melted surface of the cheese without pressing with our special raclette knife (option ref. CAR01
to apply to your retailer) in order to obtain a hot and soft raclette. From time to time you will have to cut
the edges of the cheese rind (in French «religieuses») with the raclette knife (manufactured with a double
blade: one side to scrape cheese and the other one to cut «religieuses»): we advise you to put the « reli-
gieuses » on the surface of the cheese for the next raclette.
It is essential not to touch the steely parts of the raclette appliance while using it. Very high temperatures can
be reached and may cause severe injuries.
202075 ma en 2017.09
*202.075 RACLETTE - MANUAL
.
2
1/3