Function.electronic.board.replacement - Clarke CR 28 Boost Service Manual

FUNCTION ELECTRONIC BOARD REPLACEMENT
Disassembly
1. Drive.the.machine.to.the.appointed.disposal.area,.and.empty.the.recovery.water.tank.(58).with.the.hose.(22).
2. Empty.the.solution.tank.(59).with.the.tap.(36).
3. Drive the machine on a level floor.
4. Turn.the.ignition.key.(12).to."0".
5. Carefully.lift.the.tank.assembly.(60).
6. Disconnect.the.battery.connector.(63).
7. Remove.the.nuts.(93),.then.remove.the.cover.(92).
8. Slightly.move.the.electrical.component.panel.(A).
9. Disconnect.the.connectors.(B).of.the.function.electronic.board.(C).
10. Disconnect.the.lead-in.wires.(D).
11. Remove.the.screws.(E).
12. Remove.the.function.electronic.board.(C).
Assembly
13. Assemble.the.components.in.the.reverse.order.of.disassembly.
Service Manual - CR 28 BOOST
®
ENGLISH
ELECTRICAL SYSTEM
57
S301359