Advertisement
Installation Instructions
Document No. 553-685
November 6, 2019
Installing the Migration Backplane
WARNING:
This installation should only be done by a
qualified electrician or an authorized
Siemens Industry, Inc. representative.
1. Align the backplane mounting holes with the
mounting studs on the door.
2. Secure the backplane using mounting nuts
supplied.
3. Secure tubing and signal wires to wire tie bar on
enclosure backplane, but do not connect tubing
and signal wires at this time.
The installation is complete.
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their
respective owners. © 2019 Siemens Industry, Inc.
Siemens Industry, Inc.
Smart Infrastructure
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
Figure 1. 4 and 8 AOP Migration Kits on MBC34 Door
Your feedback is important to us. If you have
comments about this document, please send
them to
SBT_technical.editor.us.sbt@siemens.com
Extension.
Document No. 553-685
Printed in the USA
Page 2 of 2
Advertisement
