Subscribe to Our Youtube Channel
Related Manuals for CyberPower BPE240V30ART3U
Summary of Contents for CyberPower BPE240V30ART3U
- Page 1 User’s Manual EXTENDED BATTERY MODULE (EBM) BPE240V30ART3U BPE240V50ART3U Cyber Power Systems, Inc. www.cyberpower.com K01-0000209-02...
- Page 2 OVERVIEW The CyberPower Battery modules (BPE240V30ART3U / BPE240V50ART3U) support 30A/50A polarized plugs, and are designed for variety of Cyber Power UPS systems. When combining with the UPS, the Battery module provides extended runtime with a 240VDC external connection. Additional parallel-connected Battery modules provide the UPS for a longer extended runtime operation.
-
Page 3: Hardware Installation
HARDWARE INSTALLATION Step 3: Rackmount rail Installation HARDWARE INSTALLATION The rails adjust to mount in 48-cm (19-inch) panel racks from 52 to These versatile EBM can be mounted in a rackmount or vertical tower 91.5cm (20.5 to 36 inches) deep. Select the proper holes in the rack for orientation. - Page 4 HARDWARE INSTALLATION Step 4: Adjust rackmount rails to fit your rack How to Slide out UPS from rail Adjust the rail depth to match your rack depth. Attach the rackmount rail The Battery pack will be secured by a safety locking mechanism midway to your rack with two screws and two plastic washers at the front of the of pulling it out of the rack.
-
Page 5: Vertical/Tower Installation
HARDWARE INSTALLATION VERTICAL/TOWER INSTALLATION Step 1: Adhere the rubber feet on the bottom side of base stands Step 3: Rotate the Multifunction LCD Module Adhere the protective rubber feet on the bottom side of UPS and EBM. Unscrew the upper panel of the UPS. Separate the upper panel from the UPS. -
Page 6: Basic Operation
Use this output cable to connect the Battery module to the Power module or to the next Battery module. BPE240V30ART3U / BPE240V50ART3U CONNECTION #1 : POWER MODULE WITH ONE BATTERY MODULE Step 1: Loosen the two screws to remove the battery cable retention bracket of the power module. - Page 7 BASIC OPERATION CONNECTION #2 : POWER MODULE WITH MULTIPLE BATTERY MODULES Step 1: Connect the 1 Battery module to the Power module using the instructions above. Step 2: Loosen the two screws to remove the battery cable retention bracket of the 1 battery module.
- Page 8 BASIC OPERATION EXTERNAL BATTERY MODULES CONFIGURATION External Battery Modules can be configured by the user to display correct estimated battery runtimes. Press the “ENTER” button to activate the “MAIN MENU”. Press the “▲” and “▼” buttons to scroll to the “Configure” option. Press the “ENTER”...
-
Page 9: Maintenance
MAINTENANCE CAUTION! To avoid electric shock, turn off and unplug the Battery Storage module from the wall receptacle before servicing the battery. To store your UPS for an extended period, cover it and store with the CAUTION! Only use tools with insulated handles. Do not lay tools or battery fully charged. -
Page 10: Technical Specifications
Over Charge Battery is overcharged. charger voltage. Charger Failure Charger has failed. 2. Contact CyberPower for repair. Cyber Power Systems, Inc. www.cyberpower.com © Entire contents copyright 2017 Cyber Power Systems, Inc., All rights reserved. Reproduction in whole or in part ®...
Need help?
Do you have a question about the BPE240V30ART3U and is the answer not in the manual?
Questions and answers