Honda HBC550W Owner's Manual page 8

◾ ◾
Make sure that the cord is located so that it will not be stepped on,
EN
tripped over, come in contact with sharp edges or moving parts, or
otherwise be subjected to damage or stress. This will reduce the risk of
accidental falls, which could cause injury and damage to the cord, which could
then result in electric shock.
◾ ◾
Keep the cord and charger from heat to prevent damage to housing or
internal parts.
◾ ◾
Do not allow gasoline, oils, petroleum-based products, etc. to come
in contact with plastic parts. These materials contain chemicals that can
damage, weaken, or destroy plastic.
◾ ◾
Do not operate the charger with a damaged cord or plug, which could
cause shorting and electric shock. If damaged, have the charger repaired or
replaced by your local authorised Honda dealer.
◾ ◾
Do not operate the charger if it has received a sharp blow, been dropped,
or has otherwise been damaged in any way. Take it to an authorized Honda
service technician for an electrical check to determine if the charger is in good
working order.
◾ ◾
Do not disassemble the charger. Take it to an authorized Honda service
technician when service or repair is required. Incorrect reassembly may result
in a risk of electric shock or fire.
◾ ◾
Unplug the charger from the electrical outlet before attempting any
maintenance or cleaning to reduce the risk of electric shock.
◾ ◾
Disconnect charger from the power supply when not in use. This will
reduce the risk of electric shock or damage to the charger if metal items should
fall into the opening. It will also help prevent damage to the charger during a
power surge.
◾ ◾
Risk of electric shock. Do not touch the uninsulated portion of output
connector or uninsulated battery terminal.
◾ ◾
Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also lend
these instructions to them to prevent misuse of the product and possible injury.
8
EN
FAST CHARGER — HBC550W