Maintenance - Honda HBC550W Owner's Manual

MAINTENANCE

WARNING:
To avoid serious personal injury, always remove the battery pack
from the tool when cleaning or performing any maintenance.
WARNING:
When servicing, use only apporoved HONDA replacement parts.
Use of any other parts may create a hazard or cause product damage.
WARNING:
It is not recommended to use compressed dry air as a cleaning
method of the charger. If cleaning with compressed air is the only method to apply,
always wear safety goggles or safety glasses with side shields when cleaning the
tool. If the operation is dusty, also wear a dust mask.
WARNING:
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid
a hazard.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
WARNING:
When servicing, use only approved HONDA replacement parts.
Use of any other parts may create a hazard or cause product damage. To ensure
safety and reliability, all repairs should be performed by a qualified service
technician at a authorised Honda dealer.
FAST CHARGER — HBC550W
EN
15
EN