Cleaning; Storage; Note The Following Trouble-Shooting - Qazqa 90500 Manual

6) When changing battery, be careful of any sharp edges that could
cut you or the wires. Do not pull on wires.

CLEANING

It is important that the solar panel is kept free of dirt and debris. A
dirty solar panel will not allow the battery to fully charge and this will
shorten the life of battery and cause the light to malfunction.

STORAGE

If you wish to store your light indoors for more than two or three
days, follow these steps to prevent damage to battery:
1. Turn the switch to OFF position
2. Store the light and solar panel where it can receive some sunlight
or room light each day. The battery needs light to maintain a
charge during storage.

NOTE THE FOLLOWING TROUBLE-SHOOTING:

1. Symptom: Light doesn't activate in normal operation.
Correction: make sure that:
1) The main unit switch is at the AUTO position.
2) The Lux control is not set too far toward (
3) The motion sensor is positioned to face oncoming movement
4) The solar cell is angled so that it gets plenty of direct sunlight for
most of day, if not the entire day.
5) Battery charge is not too low (charge for 3 sunny days—switch
turned to OFF)
2. Symptom: Light turns on during the day.
Correction: Make sure that
1) The Lux control is not set too far toward (
3. Symptom: Light quickly flashes on and off
Correction:
1) Move the Lux control toward (
2) Low battery (charge for 3 sunny days—switch turned to OFF).
4. Symptom: Light is not as bright as normal.
Correction:
1) Low battery (charge for 3 sunny days—switch turned to OFF).
)
)
)
4