Radio Reception
Tuning to radio stations
1
Press TUNER to select TUNER mode.
➜
"TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2
Press TUNER again to select the desired
waveband : FM or MW.
3
Press and hold ALBUM-/+ à á until the
frequency indication starts to change, then
release.
➜
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
3
Repeat step
if necessary until you find the
desired radio station.
●
To tune to a weak station, press ALBUM-/+ à
á briefly and repeatedly until optimal reception
found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
●
Plug and Play setting (refer to "Basic Functions -
Plug and Play").
OR
18
1
Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
●
Press TITLE-/+í/ë PRESET to select the
desired preset number.
➜
If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until "AUTO" is
displayed.
➜
starts flashing.
PROG
➜
The system will automatically store the radio
stations with sufficient signal strength, starting
from all RDS stations and followed by FM and
MW bands respectively. Weak RDS stations may
be stored in later presets.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station (or the first available
RDS station) will be played.
To stop storing the automatic preset
●
Press PROGRAM or STOP9 on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.