Advertisement
WMA
You should find the below accessories in the packaging box.
Composite video cable
(yellow)
Detailed playback features and additional functions are described in the
Make sure your DVD system and TV are connected and turned on!
Playing a disc
1
Ajust the source switch on front of the system to select the disc mode.
2
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).
3
Press OPEN/CLOSE
load a disc, then press the corresponding OPEN/CLOSE
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.
4
Playback will start automatically.
If a disc menu appears, use
selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features.
Follow the instructions given in the disc menu.
5
To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 2,
in order to play on this DVD system.
Audio cables (white, red)
accompanying owner's manual
?
on the front of the DVD system (or remote control) and
5 / 4 /
buttons on the remote to make the necessary
/
A
B
Batteries (2 x AA)
?
to close the disc tray.
Remote control
Advertisement
