Advertisement
You should find the below accessories in the packaging box.
Audio cables
(white, red)
Composite video cable
(yellow)
Detailed playback features and additional functions are described in the
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1
Turn on the system.
"AUTO INSTALL - PRESS PLAY" will be displayed.
2
Press PLAY/PAUSE 2; on the system to start installation.
Playing a disc
3
Press DISC on the remote control.
4
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).
CLOSE 0 on the front of the DVD system and load a disc, then press
5
Press OPEN
0
the corresponding OPEN
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face
down.
6
Playback will start automatically.
If a disc menu appears, use
then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow
the instructions given in the disc menu.
7
To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 4,
in order to play on this DVD system.
Component video cables
(red, blue, green)
AC power cable
accompanying owner's manual
CLOSE 0 again to close the disc tray.
0
1/¡/5/4
buttons on the remote to make the necessary selection,
MW loop
antenna
FM wire antenna
Advertisement
