Coaxial Input - SAG AIO Manual

17) RJ45 NETWORK PORT
Connect the LAN cable from the wifi router with this port.
Be sure to make your wifi name used in your Phone or Pad under same name to
control NET functions (DLNA server connection etc).
18) WIFI ANTENNA CONNECTOR
19) COAXIAL DIGITAL OUTPUT
Used for the digital recording (special recording software may be needed).
20), 21) OPTICAL INPUTS
Optical cable (Toslink) from any digital devices can be connected (like TV Set-top
box, Blu-ray player, CD Transport, Portable Players etc) to listen through AIO system

22) COAXIAL INPUT

Same as Optical ports. If you want more reliable digital sound, use this COAX port
and associated digital cable.
23) PRE OUT
When you want to use another amplifier, please connect from this port to the
amplifier. In this case, your speaker cables at AIO should be disconnected.
24), 25) AUX1, 2
For the external, analog inputs, you can use these ports and/or XLR port.
For example, phono equalized signal from your turntable can be hooked into this port.
Or any standard analog signal can be connected and played back for these ports.
26) FM TUNER ANTENNA
The quality of FM reception is strongly dependent on antenna quality.
Although a simple length of wire will act as an antenna, it may induce noise.
Experimenting with antenna type and location will reward you with better sound.
We strongly recommend to try dedicated outdoor antenna for the best performance.
27) BALANCED ANALOG INPUT
Same as AUX1,2 but with XLR cable
28) LEFT SPEAKER BINDING POST
29) AC MAINS
Check that AIO's power supply matches your local electrical service,
then plug in the AC cord.
To hear music immediately, simply turn on the main power switch.