Rear Panel View; Usb Memory - SAG AIO Manual

Rear Panel View

14) RIGHT SPEAKER BINDING POST
Connect your right speaker cable to this post. Be sure to match the polarity (+ -) like
red (+) to red and black to black.

15) USB MEMORY

Plug your Memory Stick which stores your favorite music into this slot.
When you plug in the memory, AIO will read in the table of the files and takes some
time depending on the file size of the memory.
When you want to connect external hard drives, the read-in time will be much longer.
Check by yourself to see which size of memory stick will fit your needs.
Any kinds of music files can be played from mp3, WAV, Flac, etc (up to 384k/32bit
and DSD files)
Operation is exactly same with CD playback.
But you can use +10/-10 keys from the remote to skip the folders as fast as possible.
16) PC USB
The included USB cable should be used to connect PC and AIO.
When so connected, your PC acts as host machine and recognizes AIO
as an external USB audio device.
You may need to manually select this in your PC's control panel,
under "Sounds and Audio Devices."
You may also get the PC to recognize AIO by doing a "cold boot" by disconnecting
the PC's power cable.