1. Manuals
  2. Brands
  3. airmaster Manuals
  4. Fan
  5. Eco Mancooler
  6. Instruction, operation and maintenance manual

airmaster Eco Mancooler Instruction, Operation And Maintenance Manual

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

READ AND SAVE THESE INSTRUCTIONS

Inspection

On receipt inspection shipment for damage. Report any damage to freight carrier.
Before operating, inspect unit for any damage that may have occurred during
transit or unpacking. Check guards to see that they are securely fastened to the
housing at inlet and outlet. Inspect power cords for damage to the insulation.
TURN SWITCH TO THE OFF POSITION BEFORE CONNECTING OR
DISCONNECTING THE POWER SOURCE.
OPERATE UNIT ONLY ON VOLTAGE AND FREQUENCY FOR WHICH
IT IS DESIGNED. BE SURE TO CHECK PACKAGE LABEL AND / OR
NAMEPLATE TO VERIFY CORRECT VOLTAGE AND FREQUENCY.
MAKE SURE TO USE UNIT WITH A GROUNDED POWER RECEPTICAL.
DO NOT USE GROUND ADAPTERS.
DO NOT KINK COR OR LET IT COME INTO CONTACT WITH SHARP
EDGES OR CHEMICALS.
UNPLUG FAN TO MOVE OR SERVICE.
DO NOT USE WITH ANY EXTERNAL ELECTRONIC SPEED CONTROL
DEVICES – SPEED CONTROL IS BUILT WITHIN MOTOR.
DO NOT USE IN ANY FLAMMABLE, EXPLOSIVE, OR CHEMICALLY
LADEN ENVIRONMENT.
WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE TO WATER OR RAIN.
ECo IOM Manual
Instruction, Operation, and Maintenance Manual
Version 1.0
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Eco Mancooler and is the answer not in the manual?

Questions and answers

Related Manuals for airmaster Eco Mancooler

Summary of Contents for airmaster Eco Mancooler

  • Page 1 Instruction, Operation, and Maintenance Manual READ AND SAVE THESE INSTRUCTIONS Inspection On receipt inspection shipment for damage. Report any damage to freight carrier. Before operating, inspect unit for any damage that may have occurred during transit or unpacking. Check guards to see that they are securely fastened to the housing at inlet and outlet.
  • Page 2 THE UNIT TO SERVICE) Operation The ECo Mancooler is simple to operate, simply plug into appropriate electrical receptacle (outlet) and switch on. The on / off switch is located near the top of the unit (just off to one side). It is a rotary switch that both turns the unit on / off and adjusts the speed.
  • Page 3 The sole possible maintenance that may at some point be required is cleaning of the propeller. While the ECo Mancooler is not designed for heavily dust, mist, or vapor laden air – material may accumulate on the propeller.
  • Page 4 ® UNDER NO CIRCUMSTANCES IS AIRMASTER FAN COMPANY LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES DUE TO FAILURE TO MEET THE CONDITIONS OF ANY WARRANTY. NO LIABLITY OF ANY NATURE IS ASSUMED BY THE COMPANY FOR THE FAILURE TO MAKE DELIVERY DUE TO ANY ACT OR CONDITION BEYOND ITS REASONBABLE CONTROL.

Table of Contents