Shuffle; Repeat - Philips MC-55/21M User Manual

Notes:
– "P" represents PROGRAMME and "T"
represents TRACK, "XX" is the current selected
Programme or Track number.
– The programming is automatically cleared as
soon as the CD compartment is opened.
– The function of programme setting is disable in
PLAY/PAUSE mode.
– Programme cannot be used for VCDs when PBC
is switched on. Switch off PBC before storing tracks
from such a VCD.
For MP3-CD only
1
In stop mode, press PROGRAM.
will start flashing and "AXX TXXX" will
PROG
be displayed.
On TV screen, "PXX AXX TXX?" and
"PROGRAM" will be displayed.
Press and hold S / T to select the desired
2
ALBUM and press S / T repeatedly (or
digits 0 – 9, +10 on the remote control) to
select the desired TRACK for programming.
3
Press PROGRAM to store the selection.
"PXX OK" will appear on the display briefly
and the programmed album and track number
will be displayed.
will remain on the display.
PROG
Repeat steps 1 to 3 to store other desired
album and track.
Press S or T in stop mode can review the
programme sequence.
"PXX AXX TXXX" will scroll through briefly.
Press OSD in stop mode to show the
programme information.
The Album's name and Track's name will scroll
through briefly.
Press 2Å to start programme playback. You can
4
press S / T to select the programmed track
to play.
Press 9 once stop programme playback or
5
twice to clear the programme.
pg 001-026/MC55/21-Eng

Shuffle

You can play all the tracks in random order.
1
During playing, pause or stop mode, press
SHUFFLE (VCD) to enable SHUFFLE play
mode.
SHUFFLE
2
To exit shuffle mode, press SHUFFLE (VCD)
again or 9.
SHUFFLE
Note:
– If the Shuffle function enabled, and the Repeat
function is set on, will disable the Shuffle play
mode.

Repeat

You can play the current track or the whole disc
repeatedly.
1
During CD Playing or Pause mode, press
REPEAT on the remote control or
REPEAT•DEMO on the system to select
REPEAT 1 or REPEAT ALL mode.
REPEAT
REPEAT ALL
For MP3-CD, you are able to select REPEAT 1,
REPEAT ALL or REPEAT ALB mode.
REPEAT ALB
The current track or whole disc will now be
played repeatedly until you press 9.
2
To exit the repeat mode, press REPEAT until
the
REPEAT
from the display.
Notes:
– If the Repeat function is enable, and the Shuffle
function is set on, will disable all the Repeat play
modes.
– If the Repeat function is enable, and the Stop
button is pressed, will disable all the Repeat play
modes.
– In programme mode, you can only select Repeat
1 or Repeat All function.
15
CD / VCD / MP3-CD
will appear on the display.
will disappear from the display.
1 – to repeat the current track.
– to repeat the whole disc.
– to repeat the current album.
1/ /
REPEAT ALL REPEAT ALB
6/8/01, 1:41 PM
disappears
15
point 2