Playing A Normal Disc; Selecting A Desired Track/Passage; Programming Tracks - Philips MC-55/21M User Manual

CD / VCD / MP3-CD

Playing a normal disc

Press 2Å to start playback.
1
The track number and elapsed playing time of
the current track appear on the display.
To interrupt playback, press 2Å.
The playing time will start flashing.
To resume playback, press 2Å again.
To stop playback, press 9.
2

Selecting a desired track/passage

To select a desired track
Press S or T repeatedly (or digits 0 – 9,
+10 on the remote control) until the desired
track appears on the display.
If playback is stopped, press É Å to start
playback.
To search for a particular passage during
playback
Press and hold S or T and release it when
the desired passage is located.
During searching, the volume will be reduced.
For MP3-CD only
To select a desired Album
Press and hold S or T until the desired
Album number appear on the display.
"AXX T001" will be displayed and the album
name will scroll through the display briefly.
On TV screen, the arrow will move forward/
backward in the ALBUM menu.
To select a desired Track
Press S or T repeatedly to select a desired
track from the current Album.
"A01 TXXX" will be displayed and the track
name will scroll through the display briefly.
On TV screen, the arrow will move forward/
backward in the TRACK menu.
Use the digital keys on the remote control to
select the track under current Album directly.
14
pg 001-026/MC55/21-Eng
To select and playback another track
during playback mode
Press S or T repeatedly to select another
1
track.
The current track continues playing.
The new selected track will show on the
display screen and TV screen.
2
Press É Å to start playback the new selected
track.
Note:
– "A" represents ALBUM and "T" represents
TRACK, "XX" or "XXX" is the current selected
Album or Track number.

Programming tracks

Programming tracks of disc is possible when
playback is stopped. Up to 20 tracks can be
stored in the memory in any order (except for
MP-3 CD).
1
In stop mode, press PROGRAM to enter
programme setting.
PROG
will start flashing.
"PXX TXX" will show on the display screen
and TV screen.
2
Press digits 0 – 9, +10 on the remote control
or S / T to select the desired track.
3
Press PROGRAM to store the select track.
"PXX OK" will show on the display screen
and TV screen.
Repeat steps 1 to 3 to store other tracks.
Press 9 to end programme setting.
4
PROG
Press S or T in stop mode to review the
programme sequence.
Press 2Å to play the programmed tracks.
5
If you press REPEAT during programme
playback, the current track or all programmed
tracks will be played repeatedly.
REPEAT
on the display.
Press 9 in stop mode to clear the programme.
6
"PRG CLEAR" will be displayed.
PROG
14
and the current selected track number
will remain on the display.
1/ and will appear
REPEAT ALL PROG
will disappear from the display.
6/8/01, 1:41 PM
point 2