Download
Share
Print this page
Avigilon HD-NVR4-PRM-2NDCPU Installing
  1. Manuals
  2. Brands
  3. Avigilon Manuals
  4. Computer Hardware
  5. HD-NVR4-PRM-2NDCPU
  6. Installing
Avigilon HD-NVR4-PRM-2NDCPU Installing

Avigilon HD-NVR4-PRM-2NDCPU Installing

Nvr 2nd cpu kits
Hide thumbs

Advertisement

Quick Links

Download this manual
Installing the NVR 2
Avigilon provides optional 2
nd
NVR Premium 2
l
CPU redundancy to an NVR Premium.
nd
NVR Standard 2
l
CPU redundancy to an NVR Standard.
NOTE: If the HD NVR is an operating part of your surveillance system, be aware that it must be shut down to
complete this procedure.
The installation procedure for both kits is very similar. Differences between the two procedures will be
noted in the steps.
Install the kit components in the following order:
Installing the NVR 2nd CPU Kits
nd
CPU Kits
nd
CPU kits for Premium and Standard network video recorders (NVR):
CPU Kit (HD-NVR4-PRM-2NDCPU) provides all the components needed to add
CPU Kit (HD-NVR4-STD-2NDCPU) provides all the components needed to add
2
2
3
4
9
10
11
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the HD-NVR4-PRM-2NDCPU and is the answer not in the manual?

Questions and answers

Related Manuals for Avigilon HD-NVR4-PRM-2NDCPU

Summary of Contents for Avigilon HD-NVR4-PRM-2NDCPU

  • Page 1: Table Of Contents

    Avigilon provides optional 2 CPU kits for Premium and Standard network video recorders (NVR): NVR Premium 2 CPU Kit (HD-NVR4-PRM-2NDCPU) provides all the components needed to add CPU redundancy to an NVR Premium. NVR Standard 2 CPU Kit (HD-NVR4-STD-2NDCPU) provides all the components needed to add CPU redundancy to an NVR Standard.

  • Page 2: Confirm Package Contents

    4110 2.1 Ghz (PRM) HD-NVR4-STD-2NDCPU: 1 x Intel Xeon Bronze 3106 1.7 Ghz (STD) 1 x heat sink RAM: HD-NVR4-PRM-2NDCPU: 2 x 16 GB (PRM) - (Rank2) DDR4 RDIMM HD-NVR4-STD-2NDCPU: 2 x 8 GB (STD) - (Rank1) DDR4 RDIMM 1 x processor bracket...

  • Page 3: Removing The Nvr Cover

    1. Shut down the recorder. You can skip this step if you are installing the kit on a new recorder. a. In the Avigilon Control Center (ACC) Admin Tool, click Shut Down. Wait for the application to display this message: Control Center Server is Not Running b.

  • Page 4: Installing The Cpu

    2. Installing the CPU While the recorder is open, install the CPU from the kit. 1. NVR4 Premium: If you are installing the CPU on a Premium recorder, remove the mid-plane hard disk tray. a. Disconnect the SAS and power cables (PRM only) connected to the mid-plane hard disk tray. b.
  • Page 5 2. NVR4 Standard: If you are installing the CPU on a Standard recorder, remove the black cooling shroud in the middle of the recorder and the butterfly riser slot that is positioned over the second CPU slot. a. Use a phillips #2 screwdriver to loosen the screw that is securing the butterfly riser slot. b.
  • Page 6 7. Place the heat sink on the processor and push down on the base of the heat sink until the bracket locks onto the heat sink. NOTE: Do not press on the heat sink fins. Ensure that the 2 guide pin holes on the bracket match the guide holes on the heat sink.
  • Page 7 8. Locate the 2nd processor socket.      NVR Premium (HD-NVR4-PRM-2NDCPU)      NVR Standard (HD-NVR4-STD-2NDCPU) 9. Align the pin 1 indicator on the heat sink to the system board and then place the processor and heat sink module on the processor socket. CAUTION — To avoid damaging the fins on the heat sink, do not press down on the heat sink fins.
  • Page 8 10. Push the blue retention clips inward to allow the heat sink to drop into place. NOTE: Do not force the processor into the socket. The processor should slide easily into the socket when aligned correctly. 11. Use the star-shaped screwdriver #T30 to tighten the screws on the heat sink in the following order: a.

  • Page 9: Installing The Cooling Fan (Nvr4 Standard Only)

    3. Installing the Cooling Fan (NVR4 Standard Only) NOTE: Fan installation is only required for NVR4 Standard recorders. If you are installing the 2nd CPU into an NVR4 Premium, proceed to step 4. Installing RAM on the next page. While the recorder is open, install the cooling fan from the kit. 1.

  • Page 10: Installing Ram

    4. Installing RAM After the CPU has been installed, insert the RAM included in the kit into memory sockets B1 and B2. CAUTION — Handle each memory module only by the edges to ensure that you don't touch the middle of the memory module or the metallic contacts.

  • Page 11: Restoring The Nvr

    The absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of ownership of the related trademark. Avigilon Corporation protects its innovations with patents issued in the United States of America and other jurisdictions worldwide (see avigilon.com/patents).

This manual is also suitable for:

Hd-nvr4-std-2ndcpu