Disassembly - BRP Evinrude E-TEC Series Service Manual

MIDSECTION
TILLER HANDLE SERVICE
Remove rear steering handle screw and washer.
1
1. Rear steering arm screw and washer
Remove tiller handle assembly.

Disassembly

Loosen throttle friction control so there is no
restriction on grip.
IMPORTANT:
Do not back screw out com-
pletely. Nut is under spring tension.
1. Throttle friction control
228
Remove eight screws and bottom cover of tiller
handle.
007461
1. Cover screws
Remove shift handle screw and shift handle.
1
1
1. Screw
2. Shift handle
Remove stop switch screws. Loosen start switch
nut.
007527
1
1. Screws
2. Start switch nut
1
007528
2
007529
2
007530