Connecting A Tv; Connecting Additional Equipment; 2) Using The Vcr For Recording Dvds; 3) Recording (Digital - Philips MC-D370/30 Quick Use Manual

3. Connecting a TV

You must connect a TV to your DVD micro system in order
to view the DVD/VCD playback.
IMPORTANT!
– There are various ways to connect the system
to a TV. You only need to make one of the best
connections, depending on the capabilities of your
TV system.
G Use the supplied Scart cable to connect SCART OUT
jack to the corresponding SCART VIDEO IN jack on a TV.
If your TV is not equipped with a Euroconnector, you can
select one of the following alternative connections :
Option 1
Connect the S-VIDEO OUT jack to the S-Video input
jack on the TV using a S-Video cable (not supplied).
If S-Video jack is used for video connection, the system's
VIDEO OUT setting will need to be set accordingly. Details
are on page 11.
OR
Option 2
Connect the VIDEO OUT jack to the video input jack on
the TV using a video cable (yellow).
FM
75Ω
MW SCART OUT
AC MAINS
ANTENNA
S-VIDEO
IN
Option 2
AUDIO
OUT
VIDEO IN
Helpful Hints:
– To avoid magnetic interference, do not position the front
speakers too close to your TV.
SPEAKERS
(8Ω)
+ +
– –
R L
VIDEO S-VIDEO
OUT OUT
SUBWOOFER
OUT
Option 1
L
R
DIGITAL AUX/TV LINE
OUT IN OUT
SCART IN
S-VIDEO
IN
AUDIO
SCART IN
OUT
VIDEO IN
Connecting additional
equipment
IMPORTANT!
– Some DVDs are copy-protected. You cannot
record the disc through a VCR or digital recording
device.
– When making connections, make sure the
colour of cables matches the colour of jacks.
– Always refer to the owner's manual of the other
equipment for complete connection and usage
details.
FM
75Ω
SCART OUT
MW
AC MAINS
ANTENNA
AUDIO OUT
L
3
R
DIGITAL IN
1
CD Recorder
Television
(for example)
(for example)
1) Viewing and listening to the playback of
other equipment
Connect the system's AUX/TV IN (R/L) jacks to the
AUDIO OUT jacks on the other audio/visual device (such
as a TV, VCR, Laser Disc player or cassette deck).
Before starting operation, press AUX/TV on the remote
in order to activate the input source.

2) Using the VCR for recording DVDs

Connect the system's VIDEO OUT jacks to the
VIDEO IN jacks and LINE OUT (R/L) jacks to the
AUDIO IN jacks on the VCR. This will allow you to make
analogue stereo (two channel, right and left) recordings.

3) Recording (digital)

Connect the system's DIGITAL OUT jack to the
DIGITAL IN jack on a digital recording device (such as
DTS-Digital Theatre compatible, with Dolby Digital
decoder).
Before starting operation, set the DIGITAL OUTPUT
according to the audio connection. (See page 11).

4) Connecting an active subwoofer

Connect the DVD micro system's SUBWOOFER OUT
jack to the AUDIO INPUT jack on an active subwoofer
(not supplied).
SPEAKERS Active
(8Ω)
+ +
subwoofer
AUDIO
– –
INPUT
R L
VIDEO S-VIDEO
4
OUT OUT
SUBWOOFER
OUT
L
VIDEO IN
R
DIGITAL AUX LINE
IN OUT
OUT
2
AUDIO IN
L
R
VCR
(for example)
C
ONNECTIONS
7