Playing A Disc; Region Codes - Philips MC-D370/30 Quick Use Manual

DVD MICRO SYSTEM
ECO POWER
VOLUME
SOURCE PROGRAM PLAY•PAUSE
BASS TREBLE TUNE
system and TV are connected and
1
4
5
A-B
Detailed playback features and additional functions are described in the
3
iR
STOP
PHONES
Make sure your DVD micro
turned on!

Playing a disc

1
Press DISC on the remote control.
You can also press the SOURCE button on the front panel until "DISC" appears on the display panel.
2
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (if no disc in the DVD system).
3
Press OPEN•CLOSE 0 on the top of the DVD micro system and load a disc,
then press the OPEN•CLOSE 0 again to close the disc compartment.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.
4
Press É Å to start playback.
If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary selection, then
press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the
instructions given in the disc menu.
5
To stop playback, press STOPÇ.

Region Codes

DVDs must be labelled for ALL regions or for Region 2 in
order to play on this DVD micro system.
got sound, no picture!!
Check the AV (Audio/Video) mode on your TV.
* Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or
VIDEO.
* Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see
the Video In channel.
* Or, your TV remote control may have a button or switch that chooses different video modes.
* See your TV manual for more details.
accompanying owner's manual.
2
ALL
2