Additional Information; Updating Bitdefender Box (Firmware Update); Restore To Factory Settings; Disabling The Internet Connection - Bitdefender BOX User Manual

7. Additional information

7.1. Updating Bitdefender BOX (Firmware update)

Bitdefender BOX is set up to update in background whenever a new firmware update
is available. If you would like to receive notifications each time a firmware update is
available:
1. Open the Bitdefender Central app, and then tap
2. Disable Automatic Updates.

7.2. Restore to factory settings

Either you want to setup your Bitdefender BOX in a different way than you already did,
to login to the Bitdefender Central app with another Bitdefender account, or you are
changing your residence, you can restore your Bitdefender BOX to factory settings.
By restoring the BOX to factory settings you will have to start over with the configuration
process. However, the devices you have added to your network will still be available in
your Bitdefender Central interface, but will stay unprotected until you configure again
Bitdefender BOX.
To restore Bitdefender BOX to factory settings simply insert a needle or a paperclip
into the Reset (

7.3. Disabling the internet connection

Once a device is added to your BOX network, you can decide whether it should or not
stay connected to the internet. The connectivity can be cut as long as you want.
To disable the internet connection on a device:
1. Open the Bitdefender Central app, and then tap
2. Select the desired card, and then tap
Additional information
)little hole placed on the back of your BOX and press for ten seconds.
More.
Users.
Pause next to the profile name.
21